AEROFUSION is not a fuel additive; it is a fuel optimizer that possesses numerous benefits.

During the refining and distillation process, powerful hydrocarbons are significantly reduced creating a less than perfect fuel. Through extensive research, and modern technology, AEROFUSION has combined the most powerful natural hydrocarbons in NANO sized particles to create a Super Charged aviation fuel. This enhanced AEROFUSION fuel possess numerous benefits including:

Improves fuel economy and efficiency while maximizing power output.
The process of engine combustion is what provides the power behind your aircraft’s engine. Power is produced by maximizing the “power stroke” through a controlled explosion of the fuel at the peak of the piston cycle.

The performance enhancing molecules found in AEROFUSION mix with the small quantities of Alkylates in your fuel to maximize combustion with existing octane levels, empowering the fuel in the cylinders to burn completely. This produces more power to the propeller which increases RPMs resulting in a better rate of climb. It also increases cruise speeds and shortens take-off distances while reducing the amount of fuel consumed by the engine.

Systematically removes dangerous carbon and other abrasive deposits.
A byproduct of combustion is carbon which collects and hardens on the cylinder head, cylinder wall, piston and valves. Carbon and other dangerous deposits in the combustion chamber can affect engine performance, resulting in higher oil consumption, engine knocking and overheating.

AEROFUSION removes carbon and other deposits by molecularly attaching to these elements and gently flushes them out of the exhaust system. The removal of carbon build up on valve seats, rings, and seals increases combustion and engine performance. These factors also create a more efficient fuel burn.

Removes water particles from contaminated fuel systems.
The FAA has published numerous pilot advisories regarding removing water contamination in aviation fuels and from aircraft fuel tanks before each engine start-up. This serious and life threatening condition can cause engine damage and engine shut down during flight, especially at take-off when it is most dangerous.

AEROFUSION contains components which search out and attach to suspended water particles in the fuel. These condensed water droplets then sink rapidly to the fuel tanks sump drain where they can be completely removed from your fuel system during your pre-flight inspection.

Eliminating Spark Knock and Detonation from improper fuel combustion.
Spark Knock and Detonation are serious conditions that reduce power and damage your aircraft’s engine. They are an erratic form of combustion that occurs because fuel is subjected to either too much pressure or too much heat.

AEROFUSION eliminates these dangerous and destructive conditions by creating a more efficient fuel burn. It also creates a consistent combustion temperature within the cylinder. Making it easier to start a hot or cold engine.

Lubricates and protects the entire fuel and combustion system.
AEROFUSION’s nano particle composition lubricates internal engine components as it passes through the exhaust end of the engine after the combustion process is complete. It reduces friction between moving parts, cushions moving parts against shock and help seal piston rings to cylinder walls. It also protects internal parts of the engine from rust and corrosion. The lubricated metal engine components stay cleaner, smoother and protected.

Stabilizes fuel and protects fuel systems during extended periods of non-flight.
Due to the increasing cost of aviation fuels, pilots are flying their aircraft less often. Fuel has a shelf life. In as short as two weeks, fuel begins to separate, collect water particles and corrode your entire fuel system.

The active ingredients in AEROFUSION protect the fuel in your tanks against these conditions for up to six months. It also prevents gum varnish, cleans fuel system, inhibits corrosion and maintains octane.

Significantly lowers particulate emissions for a cleaner and safer environment.
Did you know that every time you consume one gallon of gasoline, almost twenty pounds of carbon dioxide are release into the environment? Aircraft emit gases and particles which alter the atmospheric concentration of greenhouse gases, trigger the formation of condensation trails and may increase cirrus cloudiness, all of which are linked to climate change.

AEROFUSION was developed to help protect our environment by reducing dangerous emissions such as Lead (Pb), Carbon Monoxide (CO), Nitrogen Oxide (N0x), Sulfur Oxide (S0x), Sulfur Dioxide (S02), Sulfur Trioxide (S03), Unburned Hydrocarbons (HC), Sulfur (S), and particulate matter or soot (PM) from aviation fuels. When AeroFusion is added to fuel and processed through the combustion system it bonds with dangerous Sulfuric Acid compounds, the leading cause of Acid Rain, forming magnesium sulfate, a neutral compound (Mg0 + H2S04 → MgS04 +H20). As a result of reducing these emission problems, the concern over leaded and diesel type fuel emissions may cease to exist. As an eco-friendly organization, reducing emissions from entering our atmosphere is a priority.

Super concentrated formula requires less product than competitors.
AEROFUSION’s concentrated formula requires only a small dose to be added to your aircraft’s fuel. Similar products contain up to 80% liquid fillers which do nothing to benefit your aircraft’s engine. Our formula is up to eight times more powerful when compared ounce to ounce. Our small bottle is also easy to use and store in your aircraft.

Safety is Our Priority
AEROFUSION has been extensively tested and is non-corrosive to all rubber, metal and plastic components in your engine and fuel system. This natural, quick mixing liquid has been proven safe to use in combustion and jet type engines and can be safely stored in your aircraft with no worries of dangerous or corrosive properties.

The active element ingredients meet current requirements in both civil and military fuel specifications. Due to the low dosage, AEROFUSION will not change the critical properties of aviation fuel specifications as defined in ASTM D910 and Def Stan 91-90 when used as directed.

Material Safety Data Sheet
The shipping and transportation information listed with the Department of Transportation (D.O.T.) have listed AEROFUSION as a Non-regulated product when shipped in containers less than 110 US gallons, this allows us to ship AEROFUSION anywhere USPS, UPS or FedEx deliver.